BioBiteCorrector® Sleep Appliance
BBC-Orthotec GmbH · Quelle
BioBiteCorrector® Sleep Appliance:
- digital construction
- 100% individual
- high-precision milled splint
- Hinge made entirely of titanium
- biocompatible and hypoallergenic
- thermoactive flexibility
- MMA-free (0% residual monomer content)
- self-adjusting with memory effect
- Protrusion with spacer rings
- + stepless protrusion
- very high wearing comfort
- low bite lock
- best speech comfort
- via our BBC laboratory as a BEL contractual dental health insurance service
Construction templates
- STL-File
- Plaster model
- Impression
A construction bite is required to manufacture an anti-snoring splint! If you send us the data digitally, the buccal scan must be in the construction bite position with a bite block of at least 3 mm!
Incisal skeletonization in the upper jaw
- standard without skeletonization
- individually with skeletonization possible
protrusion / retrusion
- stepless adjustment in a range of 4 mm
- standard setting is stepless from -1.5 mm retrusion to +2.5 mm protrusion
- additional protrusion possible with spacer sleeves
Splint thickness
- Standard splint thickness 1.5 mm
- individual splint thickness 1.2 mm – 2.0 mm
Extras
- Titanium spacer sleeves 2.0 mm (10 pcs./pack) + € 15.90
- Wrench (2 pcs.) + € 37,80
- Intraoral non-latex elastics Ø 5/16" (8 mm), 2,7 oz. (100 pieces/pack) + € 2,-
- Intraoral non-latex elastics Ø 1/4" (5 mm), 2,7 oz. (100 pieces/pack) + € 2,-
Produktinformationen
| Hersteller | BBC-Orthotec GmbH |
|---|---|
| Insurance | BEL contractual dental health insurance service |
| Mma Content | 0% residual monomer content |
| Hinge Material | Titan |
| Biocompatibility | Biocompatible and hypoallergenic |
| Available Templates | STL-File, Plaster model, Impression |
| Protrusion Adjustment | Stepless adjustment in a range of 4 mm |
| Incisal Skeletonization | Standard without skeletonization or individually with skeletonization possible |
| Thermoactive Properties | Thermoactive flexibility with memory effect |
| Buccal Scan Requirements | Must be in construction bite position with bite block of at least 3 mm |
| Standard Splint Thickness | 1.5 mm |
| Individual Splint Thickness | 1.2 mm – 2.0 mm |
| Standard Protrusion Setting | Stepless from -1.5 mm retrusion to +2.5 mm protrusion |
| Construction Bite Requirement | Required for manufacturing |
