Dentapreg® UFM
Dentapreg - ADM, a.s · #3348 · Quelle
Ein dentales Verstärkungsprodukt aus speziell oberflächenbehandelten Glasfasern, imprägniert mit hochviskoser lichthärtender Harzmatrix. Erhältlich in Streifen und Stiften mit unidirektional ausgerichteten Bündeln oder geflochtenen multidirektional ausgerichteten Flachbändern. Die Streifen sind 6 cm lang, leicht klebrig und lassen sich einfach formen und an die gewünschte Position anpassen.
Produktinformationen
| Hersteller | Dentapreg - ADM, a.s |
|---|---|
| Form | Streifen und Stifte |
| Typ | Ultra-thin glass fiber composite flexible and formable mesh |
| Curing | Light-curable; 40 s per tooth with standard LED curing light (around 700 mW/cm²) |
| Länge | 6 cm |
| Handling | Use powder-free latex or vinyl protective gloves; non-contact technique recommended; do not use direct/intense light during application |
| Material | Glass fibers impregnated with high viscosity light-curable resin matrix |
| Packungsgröße | Protective films with non-transparent foil, sealed in blister with aluminium foil |
| Abmessungen | 4-10 x 60 x 0.1 mm (braided stretchable strips) |
| Curing Time | 40 seconds per tooth |
| Instruments | Standard instruments (tweezer, spatula, condenser, composite filling instruments); avoid instruments with sharp edges |
| Preparation | No additional surface treatment needed; fibers already impregnated with dental resin matrix |
| Curing Light | LED curing light (around 700 mW/cm2) |
| Strip Length | 6 cm (standard) |
| Fiber Orientation | Braided multidirectionally oriented flat tape |
| Composite Coverage | Entire surface of strips must be covered with composite along entire length |
| Storage Temperature | 4–25°C (39–77°F) in intact blister, away from direct light sources |
| Storage After Opening | In light protection box in refrigerator at 4–10°C, use within four weeks |
| Recommended Adhesive System | Standard two-step etch-and-rinse protocol (preferred); self-etching single-step less desired |
