Manual Systems

Zirkograph 025 ECO

The original
This copy-milling unit, also called 'The Volksfräser', is a machine designed for the manual manufacture of crown & bridge framework made of zirconia. The Volksfräser has been conceived in such a way that, owing to its small dimensions of 59 cm length and 25 cm width, it can be ideally used as a lab bench. Contrary to the Zirkograph 025, our 5-axis milling unit, the Volksfräser is supplied in its base execution as a 4-axis milling equipment only. Nevertheless, this is not a disadvantage because works with up to 14 units can be performed. Only wide spread, implant-borne, occlusally screw-retained bridges cannot be realized since the individual implants are never placed in parallel but they diverge more or less from one another. A 5th axis is required for such special bridges. As of now this 5th axis is available for the Volksfräser as well.

Specifications:

• Length: 59 cm
• Width: 25 cm
• Height: 57 cm
• Weight: 21 kg
• Output Power: 190 W
• Compressed Air Supply: 6 bar
• Range of Application: From single crowns to 16-unit bridges (using the 5th axis occlusally screw-retained bridges can be created)
• Remarks: 5th axis optional by request

Designer Zirkograph

Specifications:

• Length: 61 cm
• Width: 23 cm
• Height: 55 cm
• Weight: 24 kg
• Output Power: 190 W
• Compressed Air Supply: 6 bar
• Range of Application: From single unit crown to 16 unit bridges
• Remarks: 5th axis included

Accessories

Available accessories include:

• 5th axis for Zirkograph 025 ECO (Item number: ZBAA8241)
• Pendulum (Item number: ZBAA8231)
• Retainer Pins in various sizes (2.46/M2, 2.05/M1.4, 3/M2, 1.6/M1.4) - both standard and long versions
• Dust rings for Zirkograph 025 and 025 ECO
• Dust covers for various models
• Dust bowls and upgrade sets
• Ball bearing housing
• Springs
• Clamp claws
• Cylinder head screws