Super Etch
SDI Germany · Quelle
37% promotes strong bonding
Super Etch 37% wt phosphoric acid etchant for enamel and dentin. Easily controlled Super Etch gel flows under direction, not under gravity.
SDI's etchant range consists of:
| mL | g | |
|---|---|---|
| Super Etch Gel syringe | 2mL | 2.5g |
| Super Etch Gel syringe | 9.6mL | 12g |
| Etchant Gel bottle | 15mL | 18.75g |
| Super Etch Jumbo syringe | 25mL | 31.25g |
37% wt phosphoric acid
30 to 40% wt phosphoric acid optimally etches in 15 to 20 seconds(1). Lower concentrations require longer contact time, unnecessarily delaying procedures.
No interference with adhesive
Super Etch inorganic silica gel thickener is no obstacle to the adhesive. Other etchants block adhesives with a wax-like polymer residue which can inhibit penetration and bonding.
Thixotropic gel
Super Etch non-slump gel offers precise placement. Agitate the gel to lower its viscosity.
- Blue tint gel
- High visibility for precise placement.
Super Etch
Super Etch creates micropores in the enamel surface and removes the smear layer to unblock dentinal tubules. It promotes adhesive resin penetration and resin tag formation. Super Etch is vital for the restoration's mechanical retention.
Super Etch syringes
Super Etch offers an easy to use, leak free syringe. Direct extrusion facilitates faster procedures, economical dispensing and easier access into difficult to reach areas.
Super Etch syringe tips
Super Etch tips – 23 gauge straight tips.
In conjunction with all
- Porcelain
- Adhesives
- Composites
- Compomers
- Glass ionomers
- Sealants
- Cements
Indications
- Enamel
- Dentin
To clean
- Porcelain
(1) Reality, Volume 13, 1999, 1-23
Instructions for use
For direct placement of all restorations.
Regular viscosity Super Etch
Clean and isolate tooth.
Etch tooth surface with Super Etch 37% phosphoric acid for 20 seconds.
Wash thoroughly with water.
Remove excess water. Keep moist.
Apply Zipbond (SDI Limited) adhesive to saturate all internal surfaces, or bonding agent, according to manufacturer's instruction.
Blow gently with dry, oil free air for 2 seconds to evaporate solvent. Leave surface glossy.
Light cure for 10 seconds.
8.1. Place Aura Easyflow, Wave / Wave MV / Wave HV fluoride releasing flowable composite or
8.2. Place Aura, Aura Easy, Aura Bulk Fill or Luna composite
Light cure for 20 seconds in increments of 2mm
Polish and finish
Produktinformationen
| Hersteller | SDI Germany |
|---|---|
| Farbe | Blue tint gel |
| Form | Thixotropes Gel |
| Viskosität | Regular viscosity (agitate to lower viscosity) |
| Indikation | Schmelz, Dentin |
| Zusammensetzung | 37% wt phosphoric acid |
| Etching Time | 20 seconds |
| Kompatibilität | Porcelain, Adhesives, Composites, Compomers, Glass ionomers, Sealants, Cements |
| Application Areas | Schmelz und Dentin |
| Syringe Tip Gauge | 23 gauge straight tips |
| Cleaning Instructions | To clean porcelain |
