T3® Short Dental Implant System Surgical Kit

T3 Short Dental Implant System Surgical Kit

Everything needed to place a T3 Short Dental Implant in one compact kit.

Instrumentation specific to the T3 Short Dental Implants

Implant Treatment Options for Vertical Height Deficiencies

The T3 Short Implant's length and features are designed to provide an implant treatment option in some challenging clinical cases where the bone height is insufficient for standard length implants.

Coarse and fine micron surface features are designed to create an average mean surface roughness value of 1.4 µm along the full length of the implant.

T3 Short Implants Features & Benefits

T3 Surface

• Blasted and acid-etched implant surface with an average roughness of 1.4 µm along the full length of the implant.

Initial Bone-to-Implant Contact (IBIC)

• The dimensions of the surgical instrumentation and the T3 Short Implant provide a tight implant-to-osteotomy fit, to assist with primary stability.

Implant/Abutment Clamping Force

• Proprietary Gold-Tite Surface lubrication allows the screw to rotate further, increasing clamping force and maximizing abutment stability.

T3 Short Surgical Kit Components

Flat Bottom Shaping Drills

• Similar design to existing Tapered Implant Quad Shaping Drills
• Special cutting features
• Flat-bottom cutting tip to prepare an osteotomy that matches the dimensions of the implant

Dense Bone Taps

The surgical kit also includes taps for the T3 Short Implants:

• One tap for the 5.0 mmD implants
• One tap for the 6.0 mmD implants
• Same design as existing taps but shorter

ACT Twist Drills

• Based on the design of standard length ACT Drills
• One laser mark indicating two depths: 5.0 mm and 6.0 mm
• The depth mark includes the drill tip length for precise depth drilling
• Two cutting flutes at the tip 6.0 mm