VALO X Curing Light

VALO X Curing Light Reference and Resource Center

Congratulations on the purchase of your new VALO X curing light! We are confident your VALO X curing light will be a valuable addition to your practice.

Curing and Diagnostic Aid Modes

Curing Modes

A mid-air forward drum tap will cycle through Standard and Xtra Power Curing Modes.

To cycle to curing modes from diagnostic aid modes, press and hold the top button for 1 second.

Diagnostic Aid Modes

A mid-air sideways movement will cycle between White Light and Black Light Diagnostic Aid Modes.

To cycle to diagnostic aid modes from curing modes, press and hold the bottom button for 1 second.

Lens Accessories

Curing Lenses

PointCure™ Lens The PointCure Lens concentrates the light into a 2.5 mm aperture. This is ideal for point curing (tacking) veneers and all porcelain crowns.

ProxiCure™ Ball Lens Supports the matrix and aids in convex proximal contact before and during partial light polymerization.

Diagnostic Aid Lenses

Translume™ Lens Provides longer wavelength light to transilluminate the teeth to aid in visualization of cracks, fractures, defects, etc.

Interproximal Lens Aids in visualization of fractures, cracks, or defects in teeth by illuminating the teeth from the lingual and observing shadows.

Diffuser Lens In Black Light Diagnostic Aid Mode, the diffuser lens gives visual aid of fluorescent particles in various dental resins.

In White Light Diagnostic Aid Mode, the Diffuser Lens gives visual aid for whenever the dental professional may need a source of natural light, e.g., determining shade.

Cordless/Corded Operation and Battery Instructions

The VALO X curing light can be used in a corded or cordless configuration using the Ultradent VALO X rechargeable batteries or provided VALO X cord adapter.

Charging and Changing Batteries

To remove batteries for charging or replacement, remove the cap at the base of the curing light with a counterclockwise turn. Insert dead battery/cells in the provided Ultradent VALO Battery Charger with medical grade 9VDC AC power adapter in the orientation shown in the charger. Battery/cells will be fully charged in 1–3 hours.

To avoid the risk of electrical fire associated with handling of batteries:

• DO NOT autoclave or spray battery, battery contacts, chargers, or AC power supply with liquid of any kind. If corrosion appears on the contacts of the charger, call Ultradent Customer Service (1.888.230.1420) to order a replacement.
• DO NOT charge batteries around flammable materials
• DO NOT keep charger in clinical operatory
• DO NOT charge non-rechargeable batteries/cells
• DO NOT recharge Ultradent batteries with a non-Ultradent charger

To avoid the risk of injury, DO NOT use batteries that are corroded (rust), dented, emit an odor or fluid, have a torn or missing wrapping, or are otherwise damaged. Call Ultradent Customer Service (1.888.230.1420) to order replacement batteries/cells.

Cleaning and Maintenance

The VALO X curing light is a sealed unit with a hard surface and a scratch-resistant glass lens. Clean after each use.

Acceptable Cleaners:

• 70% Isopropyl Alcohol
• 70% Ethanol

Routinely check the lens for cured dental resins. If necessary, use a plastic or stainless steel dental instrument to carefully remove any adhered resin.

To help prevent cross-contamination and help keep dental composite material from adhering to the surface of the lens and wand body, a barrier sleeve must be used over the VALO X curing light with each use.

An extended exposure time is required to fully reprocess your device if the VALO X curing light comes in contact with a patient's tissues. To reprocess your device, the following exposure times are required: 70% isopropyl alcohol—exposure time 4 minutes; 70% ethanol—exposure time 5 minutes. A barrier sleeve should always be used as frequent reprocessing is not recommended.

Warnings and Precautions:

• DO NOT wipe down the curing light with caustic or abrasive cleaners, autoclave, or immerse in any kind of ultrasonic bath, disinfectant, cleaning solutions, or liquid. Failure to follow included processing instructions may render curing light inoperable.
• To avoid damaging the equipment, DO NOT insert fingers, instruments, or other objects into the battery/cell compartment of the curing light
• To avoid damaging the equipment, DO NOT attempt to clean the electrical contacts, or any part of the battery/cell compartment. Call Ultradent Customer Service (1.888.230.1420) if there is a concern.
• To help prevent cross-contamination and help keep dental composite material from adhering to the surface of the lens and wand body, a barrier sleeve must be used of the VALO X curing light with each use. Barrier sleeves are intended for single-patient use.
• To prevent the risk of product damage, do not autoclave or dry heat sterilize the VALO X Accessories
• DO NOT use any of the VALO X Accessories for complete/final cure. Remove all curing accessory lenses after use and perform a complete/final cure without the use of accessories.

Warranty

Ultradent warrants that this instrument shall, for a period of 5 years from the date of purchase, conform in all material respects to the specifications therefore as set forth in Ultradent's documentation accompanying the products and be free from any defects in materials/or workmanship. This warranty applies solely to the original purchaser and is not transferable. All defective products are to be returned to Ultradent. There are no user service components of the VALO curing light system. Tampering with the VALO curing light will void its warranty.

The VALO curing light warranty does not cover customer damage. For example, if a VALO curing light is misused or dropped and the lens breaks, the customer will be responsible to pay for any necessary repairs.