Diafraise Sintered Diamond Tools
DIAFRAISE SARL · source
Sintered Diamond Tools
Diafraise manufactures sintered diamond tools with expertise and high quality. Our instruments feature extra quality of abrasiveness and are designed for long-term use.
Sustainable Materials
Diamond burs are made with the traditional method. These instruments have a very high concentration of diamonds, are very abrasive and have a very long term-use.
ISO Quality Standards
The sintered diamond tools are in accordance with ISO in terms of:
- Dimensions with ISO 7711
- Tails with the ISO 1797
- Codification with ISO 6360
Special Order
Any special request of sintered diamond instruments can be manufactured according to the desired shape and dimensions.
Appliance
Our burs can be used to cut all kinds of metals: Zirconia, Ceramic, Chromium-Cobalt, Nickel Chromium and other metals.
Product Shapes Available
001 – Ball, 014 – Inverted cone, 225 – Inverted cone, 238 – Inverted cone, 023 – Hollow, 030 – Hollow, 383 – Hollow, 488 – Hollow, 111 – Cylindrical flat, 142 – Cylindrical round, 274 – Bullet, 161 – Conical, 173 – Conical flat, 198 – Conical round, 250 – Flame, 257 – Cylindrical cone, 316 – Lens, 041 – Wheel, 370 – Disk, 345 – Disk
Ordering Information
Complete order number example: 807 / 104 / 001 / 503 / 014
1 • REFERENCE 807 - Sintered diamond hand piece instruments.
2 • ∅ TAIL 104 or 114
- 104: 2.35 mm in diameter
- 114: 3.00 mm in diameter
3 • ISO FIGURE Ex.: 001 – Ball ISO figure specifies the shape of the working part.
4 • ISO CODE Ex.: 503 - Very fine grain / Medium metallic binder (Yellow) ISO code specifies the color that represents the type of binder, the diamond grain size.
5 • ∅ ISO Ex.: 014 - Very small ∅ ISO specifies the diameter of the working part.
INFO: The length of the working part (measured in mm) is indicated in the last row under the drawing of the instrument.
Safety Tips
- Push the bur shank deepest possible into the HP and block.
- The HP bur has to reach its specific rotation speed before working on the material.
- Wear protecting glasses and respiration mask.
- Avoid pressure superior of 2.0 N.
- Before each use of the diamond concretion instrument and especially the first, break the instrument with the stone moistened with water (Fig. 900).
Recommended Rotation Speed
- ISO 100/310 : +/- 10 000 min⁻¹
- ISO 080 : +/- 18 000 min⁻¹
- ISO 050/060 : +/- 22 000 min⁻¹
- ISO 031/037 : +/- 27 000 min⁻¹
- ISO 016/023 : +/- 32 000 min⁻¹
- ISO 008/012 : +/- 35 000 min⁻¹
Product Information
| Manufacturer | DIAFRAISE SARL |
|---|---|
| Iso Standards | ISO 7711 (Dimensions), ISO 1797 (Tails), ISO 6360 (Codification) |
| Product Shapes | 001 – Ball, 014 – Inverted cone, 225 – Inverted cone, 238 – Inverted cone, 023 – Hollow, 030 – Hollow, 383 – Hollow, 488 – Hollow, 111 – Cylindrical flat, 142 – Cylindrical round, 274 – Bullet, 161 – Conical, 173 – Conical flat, 198 – Conical round, 250 – Flame, 257 – Cylindrical cone, 316 – Lens, 041 – Wheel, 370 – Disk, 345 – Disk |
| Maximum Pressure | 2.0 N |
| Materials Suitable | Zirconia, Ceramic, Chromium-Cobalt, Nickel Chromium and other metals |
| Manufacturing Method | Traditional method |
| Diamond Concentration | Very high |
| Tail Diameter Options | 104 (2.35 mm) or 114 (3.00 mm) |
| Bur Shank Compatibility | Hand piece instruments (HP) |
