Endo-Apex™ : 2 in 1 Cordless Endodontic Obturation System

Endo-Apex™ : 2 in 1 Cordless Endodontic Obturation System

• Highly efficient cordless endodontic obturation system
• Comes with:
  • Gutta Easy: Thermo-plastic obturation gun (Gun tip available in 2 sizes: 23G / 25G)
  • Friendo: Vertical Condensation Pen (Pen tip available in 5 sizes: XF, F, FM, M, ML)
• 3 adjustable temperature settings
• Ergonomic design reduces hand and wrist fatigue
• The most powerful and rapid heating control mechanism

Cleaning Instructions

Friendo

Hand Piece:

1. Remove the hand piece from the charger.
2. Thoroughly clean the surface of the hand piece by wiping with a soft cloth dampened with disinfection solution not containing phenols.
3. Do not directly spray disinfection solution or disassemble any portion of the hand piece for cleaning.

Charger Base:

1. Remove the hand piece from the charger and completely disconnect from power supply.
2. Gently clean the surface of the charger by wiping with a soft cloth dampened with disinfection solution not containing phenols.
3. Do not directly spray disinfection solution or disassemble any portion of the hand piece for cleaning.

Sterilization of Pen Tip:

1. Make sure to remove all visible residue from the tip, then use thermo-disinfector to steam sterilize for cleaning (ultrasonic cleaner is recommended).
2. Disinfect, clean and steam sterilize by using proper cleaning equipments after each use.
3. New tips are not sterilized, and must be properly sterilized before use by autoclaving above 121°C (250°F) for 30 minutes and dry it for 30 minutes.
4. Ensure to clean, sterilize and disinfect tips after each use.

Hand Piece Protector:

In a steam sterilization method Gravity displacement type : sterilization temp 121°C (250°F) Time : 30 minutes, Drying Time : 30 minutes

Gutta Easy

Internal Cleaning of Hand Piece:

1. Remove the thermal protection cover.
2. Unscrew the gun tip counter clockwise to remove.
3. Turn on the device and set to 160°C.
4. Teflon cleaning brush is required for heat chamber cleaning.
5. Insert the cleaning brush to the plunger insertion hole and push it all the way through.
6. Grab and pull out the cleaning brush.

* Repeat steps 5 and 6 as needed

External Cleaning of Hand Piece:

1. Remove the hand piece from the charger.
2. Thoroughly clean the surface of the hand piece by wiping with a soft cloth dampened with disinfection solution not containing phenols.
3. Do not directly spray the disinfection solution or disassemble the hand piece for cleaning.

* Gun tip is disposable and cleaning is not recommended.

Cleaning of Charger:

1. Remove the hand piece from the charger and completely disconnect the power supply.
2. Gently clean the surface of the charger by wiping with a soft cloth dampened with disinfection solution not containing phenols.
3. Do not directly spray disinfection solution for cleaning.

Sterilizing of Thermal Protector and Gun Tip:

In a steam sterilization method Gravity displacement type : sterilization temp 121°C (250°F) Time : 30 minutes, Drying Time : 30 minutes

WARNING

Do not use nonvolatile guttapercha remover or similar cleaning solution. Permanent internal or external damage may occur when improperly cleaned.

Do NOT Use:

• Glutaraldehyde
• Lysol®
• Ammonia complex
• Denatured Alcohol
• Phenol or phenolic cleaner
• Iodine complex solutions

Precautions:

• Do not use other pellet brands, MUST only use OUR BRAND.
• Do not use expired pellets.
• Replace all worn out/damaged Plunger Teflon Ring.
• Squeeze out the leftover pellet after each use.
• Clean thoroughly after each use.