Enlighten AA TEMP 3D printing resin
Enlighten Materials Co., Ltd · source
Enlighten AA TEMP 3D printing resin for temporary restorations, is a biocompatible resin with high strength, high surface hardness and low shrinkage. It can be used for DLP, SLA and LCD 3D printers, such as Ackuretta, MiiCraft, Form 2 and Phrozen 3D printers. It can also work for 385 and 405nm light source. Currently, we are working on its FDA submission for class II medical devices.
Properties
| Property | ISO standard | Requirement | Our results |
|---|---|---|---|
| Flexural strength | ISO10477 | ≥50 MPa | 82.35 MPa |
| Water sorption | ISO10477 | ≤40 µg/mm³ | <25 µg/mm³ |
| Water solubility | ISO10477 | ≤7.5 µg/mm³ | <1.5 µg/mm³ |
| Surface Hardness | ISO187 | ≥80 Shore D | 84.65 |
| Viscosity | N/A | N/A | ~498 cps |
| Cytotoxicity test | ISO10993-5 | Non-cytotoxic | Comply |
| Irritation test | ISO10993-10 | Cause no irritation | Comply |
| Sensitization test | ISO10993-10 | Cause no sensitivity | Comply |
| Acute systemic toxicity | ISO10993-11 | Cause no acute systemic toxicity | Comply |
| Genotoxicity test | ISO10993-3 | Cause no genotoxicity | Comply |
Product Information
| Manufacturer | Enlighten Materials Co., Ltd |
|---|---|
| Viscosity | ~498 cps |
| Application | Temporary restorations |
| Light Source | 385 and 405nm |
| Water Sorption | <25 µg/mm³ |
| Biocompatibility | Yes |
| Surface Hardness | 84.65 Shore D |
| Water Solubility | <1.5 µg/mm³ |
| Flexural strength | 82.35 MPa |
| Printer Compatibility | DLP, SLA and LCD 3D printers (Ackuretta, MiiCraft, Form 2, Phrozen 3D printers) |
