Gutta Easy™ : Cordless Thermoplastic Endodontic Obturation Gun

Gutta Easy™ : Cordless Thermoplastic Endodontic Obturation Gun

Our patented Easy Swivel increases precision of thermo-plasticized back fill obturation

Reduces hand and wrist fatigue and increases precision in hard-to-reach areas

3 adjustable temperature settings (160 / 180 / 200 °C)

2 available tip sized (23G / 25G)

Cleaning Instructions

Gutta Easy

Internal Cleaning of Hand Piece:

1. Remove the thermal protection cover.
2. Unscrew the gun tip counter clockwise to remove.
3. Turn on the device and set to 160°C.
4. Teflon cleaning brush is required for heat chamber cleaning.
5. Insert the cleaning brush to the plunger insertion hole and push it all the way through.
6. Grab and pull out the cleaning brush.

• Repeat steps 5 and 6 as needed

External Cleaning of Hand Piece:

1. Remove the hand piece from the charger.
2. Thoroughly clean the surface of the hand piece by wiping with a soft cloth dampened with disinfection solution not containing phenols.
3. Do not directly spray the disinfection solution or disassemble the hand piece for cleaning.

• Gun tip is disposable and cleaning is not recommended.

Cleaning of Charger:

1. Remove the hand piece from the charger and completely disconnect the power supply.
2. Gently clean the surface of the charger by wiping with a soft cloth dampened with disinfection solution not containing phenols.
3. Do not directly spray disinfection solution for cleaning.

Sterilizing of Thermal Protector and Gun Tip:

In a steam sterilization method

gravity displacement type : sterilization temp 121°C (250°F)

Time : 30 minutes, Drying Time : 30 minutes

WARNING

Do not use nonvolatile guttapercha remover or similar cleaning solution. Permanent internal or external damage may occur when improperly cleaned.

Do NOT Use :

• Glutaraldehyde
• Lysol®
• Ammonia complex
• Denatured Alcohol
• Phenol or phenolic cleaner
• Iodine complex solutions

Precautions:

• Do not use other pellet brands, MUST only use OUR BRAND.
• Do not use expired pellets.
• Replace all worn out/damaged Plunger Teflon Ring.
• Squeeze out the leftover pellet after each use.
• Clean thoroughly after each use.