Novo Pro 12L

Novo Pro 12L - Autoclave Sterilizer

Combining the experience of modern art and minimalist shape design, it is seamless from inside to outside. Our design size can be used for any occasion, so that you can experience the charm of modern art.

Designed to make your life easier, save space and guarantee high efficiency.

Key Features

Intelligent monitoring and diagnosis system

Ensures a constant control and monitoring of the whole operating system of the sterilizer. When faults occur, it will find the failure parts sectionally, and shows the fault message and simple solution directly which makes the after-sales message is more detailed and the maintenance is more convenient. This device behaves like a "real technician" with real-time diagnostic and intervention capability.

Simplified traceability

The data of every sterilization cycle are traceable, in compliance with the applicable standards in force, thanks to the SD card Log or thermal printer (Built-in/External).

Pre-heating system

Preheating system with stand-by for minimum temperature maintenance and consequent time reduction of all the sterilization cycles.

Wind cooling super window

260x142mm large cooling area, 73 layers heat radiating aluminium sheet, 18 radiating pipe, to ensure the hot steam water changes to the cold water in a few seconds.

Product Overview

Sterilizers and accessories that help dentists and their assistants to always ensure the highest levels of safety and hygiene in their practice, in full compliance with applicable international regulations. Assures to sterilise unwrapped solid tools and porous products, small porous items, pots and containers, single-wrapped or multiple-layer wrapped products.

Operating Features

• Multi-language operating system
• Intelligent diagnosis system
• 11 Programs and tests
• Only three clicks, automatically complete sterilization cycle

Sterilization Programs

Gentle Program

Low temperature textiles, mixed loading of packaging equipment (packaged/unpackaged)

• Temperature: 134°C
• Cycle type: B
• Sterilization time: 20min
• Drying time: 18min

Quick Program

Only for emergency sterilization of solid equipment (fabric not)

• Temperature: 134°C
• Cycle type: S
• Sterilization time: 4min
• Drying time: 9min

Hollow bodies Program

Solid and hollow load, cotton fabric

• Temperature: 134°C
• Cycle type: B
• Sterilization time: 5min
• Drying time: 9min

Multiple wrapping Program

Cotton fabric, wrapping equipment, hollow load

• Temperature: 134°C
• Cycle type: B
• Sterilization time: 18min
• Drying time: 9min

Water Tank

Water tank group completely accessible and inspectionable for a perfect and complete cleaning as per the maintenance program and safeguard of the device.

3.5Liters Transparent open water quality monitoring

Water filling function Manual (Standard)/Automatic (Option) sterilizers, to facilitate filling operation, are equipped with a pump-operated filling system featuring a level sensor that stops water filling if the tank is full.

Built-in water quality detection (Option)

Thanks to the built-in quality detector, it can provide better water source for the sterilizer and extend the use time of the sterilizer.

Average water consumption:

Novo Pro 23L LED: 0.17L(Min) 0.31L(Max)

The Door

Newly designed door is easy to open and close with one hand. Safety locker with double safety locking mechanism. Cycle will not start if the door is open or not properly locked. Safety locking device prevents door from opening until chamber pressure reaches atmospheric pressure.

• Mechanical Lock
• Sensor Switch
• Pressure lock to prevent the door from opening while the cycle is running

Carrier & Tray

The carrier can be loaded with up to 5 trays or 3 trays, rotated by 90°.

Steel wire carrier

23L: 410×205×200 mm

Steel wire tray

23L: 380×190×20 mm

Instruments management assistant (Option)

F.g.: mirrors, probes etc. 205 × 140 × 32mm

Instruments management assistant (Option)

F.g.: mirrors, probes etc. 180 × 125 × 20mm

Technical Data

Electrical supply

220-240 VAC-50/60Hz, single-phase

Nominal voltage

220V, 50Hz

Max current

10A

Max. altitude

2000 asl, More than 2000m call service

Max Working Pressure

2.5 Bar (250 kPa)

Min Working Pressure

-0.9 Bar (-90 kpa)

Min atmospheric pressure

0.7bar

Max Temperature

<145°C

Overall dimensions

685×438×405mm

Max weight (fully loaded)

60kg

Pressure safety valve

2.45 bar (符合YY0154-2013和YY/T0157-2013)

Vacuum

-0.08Mpa

Sound power levels

< 80 DB

Sterilizer chamber (Total volume)

245 mm × D445 mm

Usable chamber volume

198 mm × 204mm × 385mm

Bacteriological filter

The filtration efficiency of particles above 0.3um be no less than 99.5%

Water Quality

EC (conductivity<15uS/cm)

Average water consumption

0.17L(Min) 0.31L(Max)

Tank volume

Clean water tank 3.5L, Sewage tank 1.7L

Conformity & Standards

• 93/42/EEC Medical Device Directive (MDD)
• EN 13060 Small Steam Sterilizer
• IEC 61010-1 Safety requirements for electrical equipment for measurement, control and laboratory use, general requirements
• IEC 61010-2-040 Safety requirements for electrical equipment for measurement, control and laboratory use particular requirements for autoclaves using steam for the treatment of medical materials and for laboratory processes
• EN 61326 Electrical equipment for measurement, control and laboratory use: EMC requirements