VITA YZ® ST Multicolor

The system solution for precise, efficient and true-to-shade zirconia reconstructions.

VITA YZ ST are super translucent ZrO2 blanks for the fabrication of monolithic and partially veneered posterior tooth restorations.

VITA YZ ST blanks are available in several versions:

• VITA YZ STWhite (unstained)
• VITA YZ STColor (monochromatic, tooth shades)
• VITA YZ STMulticolor (polychromatic, tooth shades)

Benefits:

• reliably reproduce tooth shades using a material system with ideally matched components
• create highly accurate restorations with material blanks with edge stability, homogeneous microstructures and tested sintering properties
• achieve efficient, solid and esthetic results thanks to tooth-shaded precolored (multi)color blanks with good shade matching to the VITA classical A1–D4 shade guide

Other variants:

The VITA YZ XT material is available in a number of other variants, including:

• White (unstained)
• Color (monochromatic, tooth shades)

Indications

• Fully-anatomical crowns and up to 14-unit bridges in the anterior and posterior tooth region
• Fully and partially veneered single-tooth and up to 14-unit bridge substructures in the anterior and posterior tooth region
• Single-tooth and up to 14-unit bridges on screw-retained restorations applied directly in the anterior and posterior tooth region
• Inlays, onlays, veneers
• Partial crowns
• Occlusal veneers (table tops)

Note: Bridges and bridge superstructures with maximum of two adjoining bridge pontics. VITA YZ ST is limited in Canada to a max. of 6 layers with a max. of two adjoining bridge pontics.

System compatibility

VITA YZ ST – UNIVERSAL SOLUTIONS

VITA offers VITA YZ ST blanks in a universal disc geometry (Ø 98.4 mm) for the CAD/CAM systems:

• Arum Dental (5x series)
• CORiTEC-Serie (imes-icore GmbH)
• DMG ULTRASONIC Serie (DMG Mori AG)
• Röders RXD Serie (Röders GmbH)
• E5/K5/K5+/R5/S1/S2/S5/S5m (vhf camfacture AG)
• inLab MC X5 (Dentsply Sirona)
• Ceramill mikro 4X/Ceramill mikro 5X/Ceramill Motion 2 (AmannGirrbach AG)
• KaVo Everest (KaVo Dental GmbH)

Note: VITA YZ DISCs can be processed with all open CAD/CAM systems, which are suitable to mill discs with a diameter of 98.4 mm (including the circumferential groove).

The range of VITA CAD/CAM material versions/geometries/shades available may vary for individual CAD/CAM system partners or systems. The hardware and software requirements in each case are available from the respective CAD/CAM system partners.