Dentapreg® UFM
Dentapreg - ADM, a.s · #3348 · source
Produit de renforcement dentaire composé de fibres de verre spécialement traitées en surface, imprégnées d'une matrice résine photopolymérisable à haute viscosité. Disponible en bandelettes et tiges avec des faisceaux orientés unidirectionnellement ou des rubans plats tressés orientés multidirectionnellement. Les bandelettes mesurent 6 cm de long, sont légèrement adhérentes et peuvent être facilement mises en forme et adaptées à la position souhaitée.
Informations produit
| Fabricant | Dentapreg - ADM, a.s |
|---|---|
| Forme | Bandelettes et pins |
| Type | Ultra-thin glass fiber composite flexible and formable mesh |
| Curing | Light-curable; 40 s per tooth with standard LED curing light (around 700 mW/cm²) |
| Longueur | 6 cm |
| Handling | Use powder-free latex or vinyl protective gloves; non-contact technique recommended; do not use direct/intense light during application |
| Matériau | Glass fibers impregnated with high viscosity light-curable resin matrix |
| Taille de l'emballage | Protective films with non-transparent foil, sealed in blister with aluminium foil |
| Dimensions | 4-10 x 60 x 0.1 mm (braided stretchable strips) |
| Curing Time | 40 seconds per tooth |
| Instruments | Standard instruments (tweezer, spatula, condenser, composite filling instruments); avoid instruments with sharp edges |
| Preparation | No additional surface treatment needed; fibers already impregnated with dental resin matrix |
| Curing Light | LED curing light (around 700 mW/cm2) |
| Strip Length | 6 cm (standard) |
| Fiber Orientation | Braided multidirectionally oriented flat tape |
| Composite Coverage | Entire surface of strips must be covered with composite along entire length |
| Storage Temperature | 4–25°C (39–77°F) in intact blister, away from direct light sources |
| Storage After Opening | In light protection box in refrigerator at 4–10°C, use within four weeks |
| Recommended Adhesive System | Standard two-step etch-and-rinse protocol (preferred); self-etching single-step less desired |
