JC BOND PFM Porcelain
Baot Biological Technology Co.,Ltd. · source
Introduction
JC BOND is used to enhance the bond between the metal substrate and the porcelain layer, ensuring the porcelain adheres firmly to the metal surface and prevents detachment or cracking.
Specification
| Category | State | Packages | Shades |
|---|---|---|---|
| JC BOND | Paste | 7g | BOND |
| JC BOND | Powder | 50g | BOND |
Firing Parameters
| Parameter | Bond | Opaque | Margin | Body* | Add On | Glaze & Stain |
|---|---|---|---|---|---|---|
| Initial Temp.(°C) | 550 | 550 | 550 | 550 | 550 | 550 |
| Drying Temp.(min) | 2 | 3 | 3 | 3 | 2 | 2 |
| Heating Time(min) | 2 | 3 | 3 | 3 | 2 | 2 |
| Heating Rate (°C/min) | 60 | 60 | 55 | 55 | 55 | 55 |
| Firing Temp.(°C) | 960 | 940 | 930 | 920 | 910 | 890 |
| Holding Time(min) | 1 | 1 | 1 | 1 | 1 | 1 |
| Cooling Time(min) | 4 | 4 | 4 | 4 | 4 | 4 |
| Cooling Temp.(°C) | 550 | 550 | 550 | 550 | 550 | 550 |
| Vacuum Start(°C) | 550 | 550 | 550 | 550 | 550 | – |
| Vacuum End(°C) | 960 | 940 | 930 | 920 | 910 | – |
Notes
(1). Body* including Cervical, Opacious Dentine, Dentine, Enamel, Transparent, Effect, Gingiva.
(2). Our recommendation for firing temperature is based on numerous test. This firing parameters may be adjusted according to the peculiarities of different furnaces. It is essential to test firing before production.
(3). Please refer to "Instruction for Use" for details.
Informations produit
| Fabricant | Baot Biological Technology Co.,Ltd. |
|---|---|
| Forme | Paste and Powder |
| Paste Size | 7g |
| Application | Metal substrate and porcelain layer bonding |
| Powder Size | 50g |
| Cooling Time | 4 min |
| Holding Time | 1 min |
| Firing Temperature | 960°C |
| Cooling Temperature | 550°C |
| Initial Temperature | 550°C |
