Novo Pro 45L Plus

Novo Pro 45L Plus - Sterilizer

Combining the experience of modern art and minimalist shape design, it is seamless from inside to outside. Our design size can be used for any occasion, so that you can experience the charm of modern art.

Designed to make your life easier, save space and guarantee high efficiency

Intelligent monitoring and diagnosis system

Ensures a constant control and monitoring of the whole operating system of the sterilizer. When faults occur, it will find the failure parts sectionally, and shows the fault message and simple solution direct which makes the after-sales message is more detailed and the maintenance is more convenient. This device behaves like a "real technician" with real-time diagnostic and intervention capability.

Simplified traceability

The data of every sterilization cycle are traceable, in compliance with the applicable standards in force, thanks to the SD card Log or thermal printer (Built-in/External).

Pre-heating system

Preheating system with stand-by for minimum temperature maintenance and consequent time reduction of all the sterilization cycles.

Wind cooling super window

260x142mm large cooling area, 73 layers heat radiating aluminium sheet, 18 radiating pipe, to ensure the hot steam water changes to the cold water in a few seconds.

About Novo Pro

Sterilizers and accessories that help dentists and their assistants to always ensure the highest levels of safety and hygiene in their practice, in full compliance with applicable international regulations. Assures to sterilise unwrapped solid tools and porous products, small porous items, pots and containers, single-wrapped or multiple-layer wrapped products.

Only three clicks, automatically complete sterilization cycle

• Multi-language operating system
• Intelligent diagnosis system
• 11 Programs and tests
• Accurate touch interface Simplicity Innovation Practically

Completely Automatic Cycles

All Programs are completely automatic and all phases are managed by advanced card equipped with a powerful microprocessor. Each phase (vacuum, preheating, exposure time, drying) is monitored, backed up and managed automatically. There is no human intervention in cycle operation.

Sterilization Programs - 134°C Cycles

Solid load

• Temperature: 134°C
• Cycle type: S
• Sterilization time: 10min
• Drying time: 9min

Quick

Only for emergency sterilization of solid equipment (fabric not)

• Temperature: 134°C
• Cycle type: S
• Sterilization time: 4min
• Drying time: 4min

Hollow bodies

Solid and hollow load, cotton fabric

• Temperature: 134°C
• Cycle type: B
• Sterilization time: 5min
• Drying time: 18min

Multiple wrapping

Cotton fabric, wrapping equipment, hollow load

• Temperature: 134°C
• Cycle type: B
• Sterilization time: 18min
• Drying time: 18min

Pre-set programs - 121°C Cycles

Programs are factory pre-set and all of them guarantee a perfect and safe sterilization of treated materials.

Solid load

Solid instruments

• Temperature: 121°C
• Cycle type: S
• Sterilization time: 30min
• Drying time: 9min

Glass

Glass instruments

• Temperature: 121°C
• Cycle type: S
• Sterilization time: 20min
• Drying time: 9min

Hollow bodies

Low temperature textile, wrapping equipment, mixed loading (packaging/non packaging)

• Temperature: 121°C
• Cycle type: B
• Sterilization time: 20min
• Drying time: 18min

Tampon

Prion

• Temperature: 121°C
• Cycle type: B
• Sterilization time: 30min
• Drying time: 18min

Water Tank

Water tank group completely accessible and inspectionable for a perfect and complete cleaning as per the maintenance program and safeguard of the device.

• 3.5 Liters Transparent open water quality monitoring
• Water filling function Manual (Standard)/Automatic (Option)
• Sterilizers, to facilitate filling operation, are equipped with a pump-operated filling system featuring a level sensor that stops water filling if the tank is full
• Built-in water quality detection (Option)
• Thanks to the built-in quality detector, it can provide better water source for the sterilizer and extend the use time of the sterilizer

Average water consumption:

• Novo Pro 23L: 0.17L (Min) 0.31L (Max)

The Door

Newly designed door is easy to open and close with one hand. Safety locker with double safety locking mechanism. Cycle will not start if the door is open or not properly locked. Safety locking device prevents door from opening until chamber pressure reaches atmospheric pressure.

• Mechanical Lock
• Sensor Switch
• Pressure lock: Pressure lock to prevent the door from opening while the cycle is running

Carrier & Tray

The carrier can be loaded with up to 5 trays or 3 trays, rotated by 90°.

Steel wire carrier

• 23L: 410×205×200 mm

Steel wire tray

• 23L: 380×190×20 mm

Instruments management assistant (Option)

• F.g.: mirrors, probes etc.
• 205 × 140 × 32mm
• 180 × 125 × 20mm

Chamber Dimensions

• 23L
• 18L

Product Size

Technical Data

Electrical supply

• 220-240 VAC-50/60Hz, single-phase

Nominal voltage

• 220V, 50Hz

Max current

• 10A

Max. altitude

• 2000 asl, More than 2000m call service

Max Working Pressure

• 2.5 Bar (250 kPa)

Min Working Pressure

• -0.9 Bar (-90 kPa)

Min atmospheric pressure

• 0.7 bar

Max Temperature

• <145°C

Overall dimensions

• 685×438×405mm (Novo Pro 23L)

Max weight (fully loaded)

• 60kg (Novo Pro 23L)

Pressure safety valve

• 2.45 Bar

Vacuum

• -0.08 Mpa

Sound power levels

• < 80 dB

Sterilizer chamber (Total volume)

• 245 mm × D 445 mm (Novo Pro 23L)

Usable chamber volume

• 198 mm × 204mm × 385mm (Novo Pro 23L)

Bacteriological filter

• The filtration efficiency of particles above 0.3um be no less than 99.5%

Water Quality

• EC (conductivity<15uS/cm)

Average water consumption

• Novo Pro 23L: 0.17L (Min) 0.31L (Max)

Tank volume

• Clean water tank 3.5L, Sewage tank 1.7L

Conformity and Standards

Medical Device Directive (MDD)

• 93/42/EEC

Small Steam Sterilizer

• EN 13060

Safety requirements for electrical equipment for measurement, control and laboratory use, general requirements

• IEC 61010-1

Safety requirements for electrical equipment for measurement, control and laboratory use particular requirements for autoclaves using steam for the treatment of medical materials and for laboratory processes

• IEC 61010-2-040

Electrical equipment for measurement, control and laboratory use: EMC requirements

• EN 61326