Screw-Tec

ZZ Screw-Tec-System

W celu połączenia (śrubami) konstrukcji wtórnych można użyć tzw. wkładki (wsadu) gwintowego "Srew-Tec"

Screw-Tec

Artykuły dostępne w systemie Screw-Tec:

• Set Screw-Tec-Tools (SW999)
• Screw-tap 2.625 (SW005) - Special tapping tool for zirconia. Cuts thread into 'green' pre-sintered zirconia (shrinkage factor 20%) for threaded bush SSAA0020
• Positioning stylus (SW007) - Positioning stylus for Screw-tap 2.625
• Bush-driver (SW008) - Used to screw threaded bush into tapped thread (SSAA0020) after sintering
• Hexagonal wrench long (SW009) - Used for cylinder-head screws M1.4 (SSAA0040, SSAA0041)
• Hexagonal wrench short (SW010) - Used for cylinder-head screws M1.4 (SSAA0040, SSAA0041)
• Milling Bur 2W30 (FR611) - Used to mill screw seats
• Stylus 2W30 (TS611) - Reads the parameters of the mock-up frame. To be used with the corresponding milling bur
• Cylinder-head screw M1.4 x 6.7 with threaded bush (titanium) (SSAA1001)
• Cylinder-head screw M1.4 x 6.2 with threaded bush (titanium) (SSAA1101)
• Threaded bush (titanium) (SSAA0020) - Titanium insert with special outer thread for zirconia and internal thread for cylinder-head screws M1.4
• Cylinder-head screw M1.4 x 6.7 (titanium) (SSAA0040) - For use in combination with threaded bush SSAA0020. Longer thread for extra tight grip
• Cylinder-head screw M1.4 x 6.2 (titanium) (SSAA0041) - For use in combination with threaded bush SSAA0020
• Modelling-sleeve long and positioning sleeve for positioning stylus (brass) (SSAA1501)
• Modelling-sleeve short and positioning sleeve for positioning stylus (brass) (SSAA1601)
• Positioning sleeve for positioning stylus (brass) (SSAA0010) - Brass guide sleeve for location of bush position inside mock-up frame. Guides drill hole into zirconia for threaded bush SSAA0020
• Model cartridge long (brass) (SSAA0060) - Determines screw position in mock-up frame. Cylinder-head screw M1.4 x 6.7
• Model cartridge short (brass) (SSAA0061) - Determines screw position in mock-up frame. Cylinder-head screw M1.4 x 6.2