Trial Kits | BAOT PFM Porcelain Metal Crown Material

Trial Kits are designed for convenience, helping technicians quickly explore the features of BAOT porcelain powders. Available in three options—Mini, Basic, and Master—each kit offers an increasing range of products and shades to suit different levels of expertise and needs.

Specification

Mini Kit

• Opaque: A2 (2g/pc)
• Dentine: A2 (5g/pc)
• Enamel: E-1B (5g/pc)
• Transparent: ▲T-1 (5g/pc)
• Modeling Liquid: CFS (15ml/pc)

Basic Kit

• JC Bond: BOND (2g/pc)
• Opaque: A2/A3 (2g/pc)
• Dentine: A2/A3 (5g/pc)
• Enamel: E-1B (5g/pc)
• Transparent: ▲T-1 (5g/pc)
• Glaze: G-1 (3g/pc)
• Modeling Liquid: CFS (15ml)
• Glaze Liquid: GY (15ml)

Master Kit

• Opaque: A2/A3/B2/B1M1 BL1 (5g/pc)
• JC Bond: BOND (7g/pc)
• Stain: S-1A/B/C/D/A 011/B 022/C 032 (3g/pc)
• Opacious Dentine: A2/A3/B2 (15g/pc)
• Dentine: A2/A3/B2/B1M1 BL1 (15g/pc)
• Enamel: E-1A/B/C (15g/pc)
• Transparent: T-1/▲T-1 (15g/pc)
• Gingiva: GIN-1A/B/B 073 (15g/pc)
• Glaze: G-1 (15g/pc)
• Cervical: C-1A/B (15g/pc)
• Margin: M-1A (15g/pc)
• T Blue 1: T-1 061 (15g/pc)
• Opal 1: T-1 062 (15g/pc)
• Natural: T-1 063 (15g/pc)
• Opal 3: T-1 064 (15g/pc)
• Creamy: T-1 065 (15g/pc)
• T Blue 2: T-1 068 (15g/pc)
• Aureola: T-1 071 (15g/pc)
• Sun Bright: T-1 075 (15g/pc)
• Occlusal: C-1C 003 (15g/pc)
• Modeling Liquid: CFS (50ml/pc)
• Glaze & Stain Liquid: GY (50ml/pc)
• Opaque Liquid: OF (50ml/pc)
• Brush-No.7

Firing Parameters

Stage	Bond	Opaque	Margin	Body*	Add On	Glaze & Stain
Initial Temp.(°C)	550	550	550	550	550	550
Drying Temp.(min)	2	3	3	3	2	2
Heating Time(min)	2	3	3	3	2	2
Heating Rate (°C/min)	60	60	55	55	55	55
Firing Temp.(°C)	960	940	930	920	910	890
Holding Time(min)	1	1	1	1	1	1
Cooling Time(min)	4	4	4	4	4	4
Cooling Temp.(°C)	550	550	550	550	550	550
Vacuum Start(°C)	550	550	550	550	550	–
Vacuum End(°C)	960	940	930	920	910	–

Note: (1). Body* including Cervical, Opacious Dentine, Dentine, Enamel, Transparent, Effect, Gingiva. (2). Our recommendation for firing temperature is based on numerous test. This firing parameters may be adjusted according to the peculiarities of different furnaces. It is essential to test firing before production. (3). Please refer to "Instruction for Use" for details.