TrueTooth – Molar
PlanB Dental · source
TrueTooth 3D printed teeth are the exact reproduction of internal and external anatomy of extracted teeth. TrueTooth teeth are created with special heat-resistant polymer, and proudly 3D printed in the USA. Special handling is necessary to realize the maximum benefits of using TrueTooth.
Instructions For Use
TrueTooth 3D printed teeth are the exact reproduction of internal and external anatomy of extracted teeth. TrueTooth teeth are created with special heat-resistant polymer, and proudly 3D printed in the USA. Special handling is necessary to realize the maximum benefits of using TrueTooth.
Access:
- Use handpieces at 1,000 RPM with no torque limit.
- Ultrasonics are not ideal, but work best when used wet.
Negotiation:
- Negotiate as normal using a lubricant.
Shaping:
- Use handpieces at normal RPM and torque settings.
Irrigation:
- Irrigate as normal using NaOCl in a syringe with a side-vent needle. TrueTooth canal tissue will dissolve after 40 minutes of irrigation, similar to vital teeth.
Obturation:
- Continuous Wave or other heated obturation techniques: use heat pluggers at 175 degrees Celsius.
- Carrier-based obturation: obturate as normal.
Radiographs:
- Use the shortest exposure time and the lowest KVP. After radiographing, lighten and sharpen image on screen for optimum viewing.
Helpful Tip:
- Use alcohol on outer surface of TrueTooth during procedure for optimum visibility. Alcohol can be used in place of NaOCl.
Informations produit
| Fabricant | PlanB Dental |
|---|---|
| Tooth Numbers | 1, 2, 3, 14, 15, 16, 17, 18, 19, 30, 31, 32 |
| Opacity Options | Transparent, Transparent Accessed, Opaque, Transparent Accessed & Shaped, Transparent Prosthodontic |
| Tooth Number Options | 1-01 Maxillary Third Molar, 2-01 Maxillary Second Molar, 3-01 Maxillary First Molar with Moderately Calcified Pulp Chamber, 3-02 Maxillary First Molar - MB2 Canal with Ladder-run Isthmus Forms, 3-03 Maxillary First Molar, 3-04 Maxillary First Molar with 3.5 Roots, 14-01 Maxillary First Molar, 14-02 Maxillary First Molar, 15-01 Maxillary Second Molar with Moderately Curved Canals, 15-02 Maxillary Second Molar with Slighly Curved Canals, 15-03 Maxillary Second Molar with Curved Buccal Roots, 15-04 Maxillary Second Molar with Immature Anatomy, 18-01 Mandibular Molar with 4 Canals, 18-02 Mandibular Molar with 3 Canals, 18-03 Prosthodontic Mandibular Molar, 19-01 Mandibular First Molar, 19-02 Mandibular First Molar with Mid-root Mesial Canal, 19-03 Mandibular First Molar with Curved Mesial Root Canal System, 30-01 Mandibular First Molar, 31-01 Mandibular Lower Molar, 31-02 Mandibular Molar with Large Pulp Chamber, 31-03 Mandibular Molar Beginner's Tooth, 31-04 Mandibular Second Molar with C Shaped Root Structure, 32-01 Mandibular Molar |
