Clicq-Pression™ Transfer Abutment compatible with Dentis® - OneQ-SL Regular Ø3.9 - Ø5.2 CC RP
Edison Medical · #113070-100-960
Automatisch erfasst von edisonmed.com
Sie sind der Hersteller?Daten liefern
Herstellertext auf Englisch
Clicq-Pression™ Transfer Abutment | Starter Kit compatible with Dentis®
Fits with: Dentis® - OneQ-SL Regular Ø3.9 - Ø5.2 CC RP
Platforms: RP
Material: Titanium (Ti-6AL-4V-ELI)
Recommended Torque Tightening: 20 NCM for Temporary | 30 NCM for Permanent
Required Screwdriver: 0.5" | 1.25mm Hex
What's included?
Straight Clicq™-Pression Abutment | Short cone 1.5 mm Height - 3 pcs Straight Clicq™-Pression Abutments | Short cone 3 mm Height - 3 pcs Straight Clicq™-Pression Abutments | Short cone 4.5 mm Height - 3 pcs
Straight Clicq™-Pression Abutment | Medium cone 1.5 mm Height - 3 pcs Straight Clicq™-Pression Abutments | Medium cone 3 mm Height - 3 pcs Straight Clicq™-Pression Abutments | Medium cone 4.5 mm Height - 3 pcs
Straight Clicq™-Pression Abutment | Long cone 1.5 mm Height - 3 pcs Straight Clicq™-Pression Abutments | Long cone 3 mm Height - 3 pcs Straight Clicq™-Pression Abutments | Long cone 4.5 mm Height - 3 pcs
15° Degrees Clicq™-Pression Abutments | Large Cone 1.5 mm Height - 3 pcs 15° Degrees Clicq™-Pression Abutments | Large Cone 3 mm Height - 3 pcs
25° Degrees Clicq™-Pression Abutments | Large Cone 1.5 mm Height - 3 pcs 25° Degrees Clicq™-Pression Abutments | Large Cone 3 mm Height - 3 pcs
TAP-AN-S | Short Abutment Analog for Clicq™-Pression Abutment - 3 pcs TAP-AN-M | Medium Abutment Analog for Clicq™-Pression Abutment - 3 pcs TAP-AN-L | Long Abutment Analog for Clicq™-Pression Abutment - 3 pcs
TAP-PT | Snap-on plastic transfer - 15 pcs
TAP-HA-S | Short Peek healing abutment for Clicq™-Pression Abutment - 3 pcs TAP-HA-M | Medium Peek healing abutment for Clicq™-Pression Abutment - 3 pcs TAP-HA-L | Long Peek healing abutment for Clicq™-Pression Abutment - 3 pcs
HSDA-SV-L | Long manual screwdrive 1.25 mm hex - 1 pcs
Main Advantages
Enables taking a more accurate impression
Enables taking a full arch / mouth impression
Could be used as a final abutment
Titanium Nitride (TiN) coating finish
Cost Effective – can be reused several times
Time efficient
Related Products
Snap-On plastic transfer is included
Peek healing cap can be purchased separately
Abutment Lab Analog can be purchased separately
Castable waxing sleeves can be purchased separately
Ihre AuswahlDentis® - OneQ-SL Regular · Ø3.9 - Ø5.2 CC RP
Produktinformationen
| Hersteller | Edison Medical |
|---|---|
| Drehmoment | 20 Ncm |
| Material | Titanium (Ti-6AL-4V-ELI) |
| Plattform | RP |
| Menge | 3 |
| Verbindung | Dentis® - OneQ-SL Regular Ø3.9 - Ø5.2 CC RP |
| Antriebstyp | 0.5" | 1.25mm Hex |
| Kompatibilität | Dentis® OneQ-SL Regular Ø3.9 - Ø5.2 CC RP |
| Kompatibles Implantatsystem | Dentis® - OneQ-SL Regular |
| Kompatible Implantatplattform | Ø3.9 - Ø5.2 CC RP |
| Empfohlenes Anzugsdrehmoment | 20 NCM for Temporary | 30 NCM for Permanent |