Clicq™-Pression Transfer Abutment

Clicq™-Pression Transfer Abutment | Professional Kit compatible with Dental Tech®

Fits with: Dental Tech® - Implassic® FT3 Ø3.75 - Ø4.75 IH 3.5 RP
Platforms: RP
Material: Not Applicable (Multiple)
Recommended Torque Tightening: NA
Required Screwdriver: NA

What's included?

Straight Clicq™-Pression Abutments | Short cone 1 mm Height - 3 pcs Straight Clicq™-Pression Abutments | Short cone 2 mm Height - 3 pcs Straight Clicq™-Pression Abutments | Short cone 3 mm Height - 3 pcs

Straight Clicq™-Pression Abutments | Medium cone 1 mm Height - 3 pcs Straight Clicq™-Pression Abutments | Medium cone 2 mm Height - 3 pcs Straight Clicq™-Pression Abutments | Medium cone 3 mm Height - 3 pcs

Straight Clicq™-Pression Abutments | Long cone 1 mm Height - 3 pcs Straight Clicq™-Pression Abutments | Long cone 2 mm Height - 3 pcs Straight Clicq™-Pression Abutments | Long cone 3 mm Height - 3 pcs

15° Degrees Clicq™-Pression Abutments | Large Cone 1 mm Height - 3 pcs 15° Degrees Clicq™-Pression Abutments | Large Cone 2 mm Height - 3 pcs 15° Degrees Clicq™-Pression Abutments | Large Cone 3 mm Height - 3 pcs

25° Degrees Clicq™-Pression Abutments | Large Cone 1 mm Height - 3 pcs 25° Degrees Clicq™-Pression Abutments | Large Cone 2 mm Height - 3 pcs 25° Degrees Clicq™-Pression Abutments | Large Cone 3 mm Height - 3 pcs

TAP-AN-S | Short Abutment Analog for Clicq™-Pression Abutment - 3 pcs TAP-AN-M | Medium Abutment Analog for Clicq™-Pression Abutment - 3 pcs TAP-AN-L | Long Abutment Analog for Clicq™-Pression Abutment - 3 pcs

TAP-PT | Snap-on plastic transfer - 15 pcs TAP-WS | Anti-rotational waxing sleeve for Clicq™-Pression Abutment - 3 pcs TAP-WSR | Rotational waxing sleeve for Clicq™-Pression Abutment - 3 pcs

TAP-HA-S | Short Peek healing abutment for Clicq™-Pression Abutment - 3 pcs TAP-HA-M | Medium Peek healing abutment for Clicq™-Pression Abutment - 3 pcs TAP-HA-L | Long Peek healing abutment for Clicq™-Pression Abutment - 3 pcs

Try-it | Gauge indicators, straight / 15° Degrees / 25° Degrees - 13 pcs HSDA-SV-L | Long manual screwdrive 1.25 mm hex - 1 pcs

Main Advantages

Enables taking a more accurate impression
Enables taking a full arch / mouth impression
Could be used as a final abutment
Titanium Nitride (TiN) coating finish
Cost Effective – can be reused several times
Saves time

Related Products

Snap-On plastic transfer is included
Peek healing cap can be purchased separately
Abutment Lab Analog can be purchased separately
Castable waxing sleeves can be purchased separately